Setup and activation instructions for Digital Voice Professional

Digital Voice Professional is the phone solution built for your small business. Use this start-up guide to get up and running.

Up to 20 individuals can use Digital Voice Professional, which comes with up to three phone numbers. It's the voice solution that small company customers prefer the most due to its security and versatility.

List of Included
Equipment

Verify that you have all the necessary equipment:

Polycom business phone
Power adapter cord
Network cable
Base stand
Installation guide
911 sticker

Setup instructions for Digital Voice Professional

Only phones that are connected to your internet connection will support Digital Voice. Digital Voice will not function with any phones that are hooked into a normal phone jack.

Once connected to your Brightspeed internet service, the Digital Voice Polycom phone will instantly self-configure. The phone only needs to be plugged in and then you just need to connect the cords in the following four steps:

Connect the handset to the phone base
Connect the network cable
Connect the network cable to the phone's network port at the bottom. The active Ethernet port on the back of your modem or an Ethernet wall jack should be connected to the other end of the wire.
Plug in the phone
The power adaptor cord should be attached to the phone's base and plugged into a wall socket. Watch for the lights to start to illuminate on the phone's display.
Self-configure
Simply wait till your Digital Voice phone's automatic setup is finished. It is ready to use once you hear the dial tone.

Important Information: It may take up to 15 minutes to complete the configuration. When any of the lights are flashing during this initial boot up and configuration process, do not unplug or restart the phone. This can result in a malfunction.